edinn - What is edinn® M2?

What is edinn® M2?

edinn® M2 is the only system that electronically monitors the productive processes and integrates the functions and standards that are necessary for the improvement: OEE, SPC, Autocontrol, MTBF, MTTR and Energy Efficiency.

Main characteristics

It is useful for any productive process and therefore for any company or organization: manual or with machinery.
It can be 100% visually configured by the user, including capturing of signals and counters.
It is 100% adjusted to standards: OEE, MTBF, MTTR, SPC, OPC, etc.
It is designed to be incredibly intuitive and easy to use, with big buttons and texts, also for tactile screens.
It has exclusive monitoring and visualization functionalities that show the production process like never seen before.
It is perfect to remotely control a factory.
Works with slow or noisy communication networks (on/off-line).
It allows the user or the system integrator to program any specific need (UDL, User Defined Logic).
It is approved by “tier 1” providers of the automobile sector.
100% compatible and essential for “lean” techniques.

Main functions

Production efficiency:
- Main international ratios:oee.html"> OEE , MTBF , etc
- Personnel and resource control
- Times control + Times usage autochange
- Stock and Tracing (Integrated with ERP)
- Contextual launching: zero papers
- SCADA
Energy efficiency(PUE)

Main international ratios: PUE, DCIE, OCE, etc.
Integrated with production efficiency
Requirement of justification
Reports on consumption per produced unit and 100% detail on causes of extra consumption.

Cost and resource efficiency
spc.html">Quality (Statistical Process Control SPC)
Autocontrol:
- autocontrol.html">Production regulated by procedures
- Maintenance regulated by production
Integration with other systems: ISA95 on web services and XML
Production and maintenance scheduling
Barcode
Development platform (UDL): Allows to programme any new need on the programming module
Vision camaras
Prediction/Notificaction(Neural Networks)
Easy installation and configuration: no need of programming.
Standardized and affordable price.
All reports available on the web.

Example of a production losses analysis

Although a production process (manual or machine) has a nominal production speed of for example 50 units per minute, while calculating the average production during a week, you are hardly producing 30 units per minute. Where did these 20 lost units per minute go?

If you could exactly know, in a reliable way, automatically from the machine, where these 20 units per minute did go, you are on the way to continuous improvement. This is precisely the information that edinn® M2 will provide you, in real time, automatically, a detail of the losses, like you have never seen before.

It´s the only system which is able to automatically monitor production processes because this function, and many others, are internationally patented by edinn®.

[ Back ]

"edinn, with its edinn® M2 product, is our strategic partner concerning productivity and efficiency improvements".

Sandra López, Production Area Manager at CTAP.

"Without edinn® M2 we would be "blind" because we do not have enough information about process efficiency, quality and availability".

Miguel Angel Gil, Frudesa's (Bonduelle) Production Manager.

"edinn® M2 has everything we need to improve our production and to reduce our work load".

Javier Mandiola, founder, owner and Manager of Mandiola Composites.

"Since we use edinn® M2, the operator can handle more moulds and can switch to other tasks easily".

Javier Mandiola, founder, owner and Manager of Mandiola Composites.

"Thanks to edinn® M2, productivity has been increased because operators now follow procedures better".

Javier Mandiola, founder, owner and Manager of Mandiola Composites.

"Total time dedicated by our personnel has been significantly reduced because tasks are automated by the system."

Manolo Montes, Production Manager in Metaldyne.

"edinn® M2 is really intuitive and easy to use. Some of our operators had never interacted with computers before and are easily using the tactile screen, even when they are wearing gloves".

Manolo Montes, Production Manager in Metaldyne.

"We have obtained an improvement of 10% from the moment we started the edinn® M2 system".

Raúl Gil, Production Manager in Bosal.

"We are very pleased with edinn® M2 and that is why we recommend it to other companies".

César Mingueza, Production Manager in Incaelec

"Edinn M2 is a good product, maybe the best in its market segment.".

Ignacio de Miguel loogic.com